Disassembly & Transportation of All Magnum Target Texas Stars & Revolving Plate Racks

Instructions apply to the following Magnum Target products:

TS-8 / TS-6 / TS-6-14 / TS-4-14 / RPR-6 / RPR-8 / RPR-10

Required Tool: (1) 9/16" wrench or socket

1. Start by removing all the paddles from the target. These can be carried separately.
2. With a 9/16" wrench or socket, loosen and remove the top (2) 3/8" bolts and nuts from the (2) 3” Square Connector Brackets that surround and connect the Hub Assembly to the top of the 3”x21” Vertical Hub Support Plate. They may need loosened, but leave the bottom (2) 3/8" bolts and nuts attached to the 3”x21” Vertical Hub Support Plate. The revolving hub and paddle arms can now be removed as one assembly.
3. Your target is now broken down into three sections. The paddles, the hub and arm assembly and the stand. Further disassembly is possible if needed for easier transport or storage.