Parts & Assembly Instructions for Magnum Target 3/8" AR500 Portable Revolving Plate Rack / Dueling Tree “No Weld” - Texas Star Type - Reactive Steel Shooting Target w/ 6in Paddles - RPR-10

Magnum Target 6” Revolving Plate Rack

SKU: RPR-10

Included Parts

(10) 6” Plate Rack / Texas Star Paddles

(2) 24" Long Pre-Assembled Rack Arms

(8) 3/8" Carriage Bolts and Lock Nuts for Rack Arms

(1) Pre-Assembled Hub Assembly

(4) 3” Square Connector Brackets

(12) 3/8" Carriage Bolts for Hub Assembly and Stand

(12) 3/8" Hex Nuts for Hub Assembly and Stand

(1) 3”x21” Vertical Hub Support Plate

(1) T-Shaped Base w/ Welded Brackets

(2) 0-20 Degree 24” Legs

Assembly Instructions

1. The T-Shaped Base comes pre-welded with mounting brackets on either side for the 24” Legs.  The Legs will be mounted using (4) included 3/8" bolts and nuts.  We recommend a straight upward angle perpendicular to the ground.  
2. (2) 3” Square Connector Brackets will surround and connect the 3”x21” Vertical Hub Support Plate to the top of the T-Shaped Base using (4) included 3/8" bolts and nuts.
3. (2) 3” Square Connector Brackets will surround and connect the Hub Assembly to the top of the 3”x21” Vertical Hub Support Plate using (4) included 3/8" bolts and nuts.
4. The 21” Long Rack Arms will mount to the front of the Hub Assembly using (8) included 3/8" carriage bolts and lock nuts.
5. The paddle guides and retainers on the Rack Arms come pre-assembled with spring and fasteners. 
6. Lastly, insert the paddles and you’re ready for the range!