Parts & Assembly Instructions for Magnum Target 22LR Texas Star Steel Reactive Shooting Target w/ 4 inch Paddles (TS-4-14)
Magnum Target 6” Texas Star for 22LR
SKU: TS-4-14
Included Parts
(5) 4” Texas Star Paddles
(1) Pre-Assembled Hub Assembly w/ Star Rotation Stop Bolt for Beginners
(4) 3” Square Connector Brackets
(22) 3/8" Carriage Bolts
(22) 3/8" Hex Nuts
(5) 16.375" Long Pre-Assembled Star Arms
(1) 3”x21” Vertical Hub Support Plate
(1) T-Shaped Base w/ Welded Brackets
(2) 0-20 Degree 24” Legs
Assembly Instructions
- The T-Shaped Base comes pre-welded with mounting brackets on either side for the 24” Legs. The Legs will be mounted using (4) included 3/8" bolts and nuts. We recommend a straight upward angle perpendicular to the ground.
- (2) 3” Square Connector Brackets will surround and connect the 3”x21” Vertical Hub Support Plate to the top of the T-Shaped Base using (4) included 3/8" bolts and nuts.
- (2) 3” Square Connector Brackets will surround and connect the Hub Assembly to the top of the 3”x21” Vertical Hub Support Plate using (4) included 3/8" bolts and nuts.
- The 16.375” Long Star Arms will mount to the front of the Hub Assembly using (10) included 3/8" bolts and nuts. There should be an 1/8" evenly spaced between each Star Arm (triangular shaped area in the center). This will keep the weight distributed evenly throughout the Star while rotating.
- The paddle guides and retainers on the Star Arms come pre-welded and assembled with spring and fasteners.
- Lastly, insert the paddles and you’re ready for the range!