Parts & Assembly Instructions for Magnum Target 3/8" AR500 Dueling Tree Steel Reactive Shooting Target w/ Tubes & 4 inch Paddles (DTSTD46AR500)

Magnum Target 4” Dueling Tree

SKU: DTSTD46AR500

Included Parts

(6) 4” Studded Dueling Tree Paddles (SKU: HDDT46AR500)

(3) 3”x21” Tree Module w/ Pre-Welded Rings

(1) T-Shaped Base w/ Welded Side Brackets

(2) 24” 0-20 Degree Legs

(4) 3” Square Connector Brackets

(16) 3/8" Carriage Bolts

(16) 3/8" Hex Nuts

Assembly Instructions

1. The T-Shaped Base comes pre-welded with mounting brackets on either side for the 24” Legs.  The Legs will be mounted using (4) included 3/8" bolts and nuts.  We recommend a 10-20 degree angle forward toward the shooter for reliable paddle rotation and minimal “slap-backs”.  (20 degrees being the max)
2. Attach (2) of the 3” Square Connector Brackets to either side of the T-Shaped Base using (2) included 3/8" Bolts and Nuts in the bottom two holes only.  Hand tighten, don’t snug down.
3. Slide (1) of the 3”x21” Tree Modules in between the (2) 3” Square Connector Brackets ENSURING the welded “Open” rings are on top and “Closed” rings are on the bottom.  Paddles will not insert into the rings or swing if the Modules are installed upside down.  Insert (2) included 3/8" Bolts and Nuts through the top two holes of the 3” Square Connector Bracket and snug down all four bolts. Insert (2) 6” Studded Dueling Tree Paddles.
4. Attach the second 3”x21” Tree Module on top of the already attached Module using (4) included 3/8" bolts and nuts and (1) 3” Square Connector Bracket on the back side (side with rings). Again ENSURING the welded “Open” rings are on top and “Closed” rings are on the bottom. Insert (2) 6” Studded Dueling Tree Paddles.
5. Repeat step 4 for the last 3”x21” Tree Module.
6. Lastly, ensure all bolts and nuts are securely tightened down and you’re ready for the range!