Assembly Instructions for Magnum Target 3/8" AR500 Spring Stake Stand Targets
Compatible Target Systems
- SPR-CLUB6x12AR500
- SPR-DIAMOND6x12AR500
- SPR-HEART6x12AR500
- SPR-SPADE6x12AR500
- SPR-PPR6x12AR500
- SPR-IDPA7x12AR500
- SPR-PDAR500-2E
- SPR-RAB1AR500
- SPR-SQRL1AR500
Step 1: Insert 1/2" carriage bolts into the 1/2" square holes in the silhouette body.
Step 2: Lay the body face down with the bolts up.
Step 3: Slide (1) red spring over each bolt.
Step 4: Slide the Slotted Stake Stand w/ welded base platform over the bolts using the (2) 1/2" round holes. Position the spike down and top of silhouette up.
Step 5: Hand thread on the 1/2" lock nuts. Using a 3/4" wrench or socket, evenly and gradually tighten down the lock nuts. (Drill or impact will make quick work of this process).
Step 6: Slide the V-Shaped Stake Support into the pre-cut Stand Slot with all points facing down.
Step 7: Pick your desired location and hammer the entire assembly into the ground by hitting the stop of the welded base platform. Use bottom of the silhouette or pictures as reference for depth. The assembly can be hammered in at a downward angle for safer bullet deflection.
